The pneumatic conveying system is the most common type of material handling equipment. It uses a small diameter pipeline that moves bulk materials with low velocity. It has few moving parts and is relatively easy to maintain. It produces less waste and has very little risk to the operators. The pneumatically powered pipe moves materials within a contained environment that is safe for the environment and safe to work with. There are many advantages of using a pneumatic system.
What Factors to Consider Before Purchasing a Pneumatic Conveyor?
Before purchasing a pneumatic conveyor, it's important to consider a few factors. The distance of the product, the flow rate, and the geometry of the material are all vital considerations. These factors will determine the size and shape of the pipe and the air mover. The number of outlets and twists must also be considered. You'll also need to decide on the material's density. This will affect the design and installation of the system.
When selecting a pneumatic conveying system, you should take several factors into account, including the physical plant environment, the availability of plant air, and the material's characteristics. You can also use the pneumatic conveying system to transport bulk materials and other products. For example, if your material is dense, you can choose a conveyor with a low-dense phase. This type of system is good for bulk materials. It can also convey liquids.
Important Advantages of Pneumatic Conveying System
One of the greatest advantages of using a pneumatic conveying system is that it's easy to install and can be easily adapted to your existing equipment. It doesn't require structural support and can handle various materials. Additionally, its low material-to-air ratio makes it suitable for a variety of applications, including handling abrasive and friable materials. Because it's enclosed, you don't have to worry about exposing your process to the elements.
A pneumatic conveyor system uses pressure differentials and the progression of gas to convey materials. The progression of the material is caused by contrasts in pressure. If the blower expands, a fine Powder Stream will result. You can select a push-pull blend system depending on the characteristics of your materials.
The most popular type of pneumatic conveying system is the dense type, which moves material at a moderate density. This type of pneumatic conveying system is suitable for moving materials such as cement, ash, soda ash, lime, salt, sand, silica, food powder, etc. Its semi-dense version is ideal for materials that are not dense or too dense. In addition to this, a pneumatic conveying system can also be easily adjusted to suit your application.
The Bottom Line
The benefits of a pneumatic conveying system are many. It is highly customizable, does not require structural support, and can handle multiple infeed points. It also has the capacity to convey long distances and has a wide range of infeed and outfeed points. The disadvantage of a pneumatic conveying system is its high power requirements. A standard compressor is enough to move a small amount of material. However, the speed of the air is not enough to move materials from one location to another.
